Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Tools/Maintenance

Rock-N-Roll Gold Bike Chain Lube
$7.50
Rock-N-Roll Gold lubricant is for both mountain and road bike use. The formulation goes deep down into the chain and traps any dirt. Then, with the energy of the chain freewheeling backwards, the dirt and grit floats to the surface so you can wipe it all off, leaving a new and clean application of lube inside the chain, where it's needed. - All-purpose lube - Cleans and lubricates simultaneously
Wheels Manufacturing Inc. GXP-LEFT Open Bore Adapter
$7.50
This Wheels Mfg. GXP-LEFT open bore adapter is used to press 22x37 sealed bearings in to SRAM GXP bottom bracket cups and direct fit frames like TREK BB90. The adapter is machined with one step at 22mm OD, which fits in to the center of the sealed bearing. - Installs: 22X37 (GXP) bearing - Inner Step Outer Diameter: 22mm - Outer Diameter: 37mm - Thru Hole Diameter: 0.387" (9.8mm) - Inner hole sized to fit 3/8" ACME threaded rod - Compatible with PRESS-1 or PRESS-4 handles - Machined, red anodized aluminum - Sold individually
Wheels Manufacturing Inc. Open Bore Adapters
$7.50
Wheels Manufacturing open bore adapters are used to press sealed cartridge bearings into place. The adapters are machined with one step to correspond to the bearing OD, which fits in to the center of the sealed bearing and an outside diameter to accommodate the bearing's outer diameter. Size: [Bearing inner diameter] x [Bearing outer diameter] Note: If only one dimension is given, that is the outer diameter of the adapter, with no inner diameter step
Wheels Manufacturing Inc. Over Axle Adapter
$7.50
Wheels Manufacturing Over Axle Adapters are used for pressing your most commonly used bearing sizes into place. Each represents an excellent addition to the Press-4 Bearing Press. - Adapters sold individually
Park Tool Cassette Lockring Tool
$7.95
Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also fits Shimano disc brake lockrings - Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut
Park Tool FR-4 Freewheel Remover
$7.95
The Park FR-4 Freewheel Remover fits Atom, Regina, splined Zeus and some Schwinn-approved freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.
Park Tool FR-7 Freewheel Remover
$7.95
The Park FR-7 Freewheel Remover fits Falcon freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.
Park Tool Four-Sided Spoke Wrench
$7.95
Park's Four-Sided Spoke Wrenches grip 4 sides of the spoke nipple so they offer an excellent grip and won't slip or round nipples when turning even the tightest spokes and/or aluminum nipples. These popular wrenches also have easy-to-hold vinyl-coated loop handles that are color-coded according to spoke size for easy identification. The loop handle makes them easy to hang on your tool board too.
Park Tool Offset Brake Wrench
$7.95 - $10.49
Park's Offset Brake Wrench utilizes a unique design that allows it to reach into tight areas that other wrenches cannot. The OBW-3 features a 14mm wrench on one end and the other end fits into a brake's tension springs to rotate the brake around its bolt for proper alignment. The OBW-4 features 10-, 11-, 12-, and 13-mm opening to fit most models of sidepull brakes.
Park Tool P-Handled Hex Wrench (5mm)
$7.95
Choose the perfect tool for the job with Park's P-Handled Hex Wrenches. These top-shelf Allen wrenches come with offset handles made from durable nylon in a comfortable, ergonomic design. They are made of chrome vanadium for exceptional durability. The long shafts feature Bondhus heads for accessing hard-to-reach bolts and the short ends are chamfered for extra grip and high-torque applications.
Park Tool P-Handled Torx Wrenches
$7.95 - $9.95
They always say, the right tool for the right job. Park's P-handled Torx Wrenches are available in T6, T8, T10, T15, T20, T25, T30 and T40 sizes. They feature offset handles made from durable nylon with a comfortable, ergonomic design. The wrenches are made of high-torque industrial steel for excellent durability.
Topeak CageMount
$7.95
Topeak's CageMount is an easy way to attach an additional water bottle cage to your handlebar or seat post. Provides convenient access to an extra water bottle during extended commutes or when cycling in warmer weather.
Crank Brothers Speedier Lever
$7.99
Crank Brothers puts their well-known design aesthetic to the humble tire lever with the Speedier Lever. Can we call a single piece of nylon revolutionary? First off, this thing is tough. It removes and installs wire-beaded DH tires, UST tires, and brand-new road tires easily, without breaking. The genius loop protects your knuckles! It installs tires too, without pinching the tube, just flip it and use the other side. And only one lever is needed to remove even the most recalcitrant tires. Oh Speedier Lever, where have you been all my life?
Finish Line E-Bike Cleaner
$7.99
E-Bike Cleaner is formulated to remove grit and grime from frames, wheels and components of e-Bikes. To ensure a clean e-Bike while not damaging expensive electronic components, Finish Line engineered a clinging foam cleaner that is gentle, noncaustic, leaves no streaks, and requires no water rinsing. Finish Line’s e-Bike Cleaner is an ideal complement to any dealer specializing in e-bike sales and service.
Finish Line Fiber Grip Assembly Gel
$7.99 - $34.95
Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.
Finish Line Gear Floss (20 Microfiber Ropes)
$7.99
Finish Line's Gear Floss is the ultimate detailing tool, perfect for cleaning your cassette, chainrings, derailleur pulleys, hubs and all those hard-to-reach nooks and crannies. Made with microfiber, it works by attracting and capturing dirt, grease and particles inside its star-shaped grooves. Each package has 20, 20-inch-long ropes that are washable and reusable.
Finish Line Premium Grease With Teflon (3.5-Ounce Tube)
$7.99
Finish Line's Premium Grease With Teflon is a race-proven lubricant formulated for the unique demands of bicycle bearings. It's exceptionally strong and thick, it doesn't separate and it repels water even when submerged. Rated "5 Chainrings, Exceptional Grease" by Bicycling Magazine, it's very slick and very tough and lasts as much as 5 times longer than petroleum grease.
Finish Line Pro Chain Cleaner Rebuild Kit
$7.99
- OE replacement kit for Finish Line Pro Chain Cleaner, includes brushes, scrubbers and pins
Jagwire Hydraulic Hose Cutter Replacement Blades
$7.99
Hydraulic line cutting tools provide precise, repeatable cuts in a convenient handheld package. - Compatible with Jagwire Pro and Sport level hydraulic hose cutters
Park Tool Bottom Bracket/Cassette Tool for Campagnolo
$7.99
Park's BBT-5 is an indispensable tool for your Campagnolo drivetrain. Use it to install and remove Record, Chorus, Centaur and Athena bottom-bracket cartridges, as well as all Campagnolo cassette lockrings.
Tri-Flow Superdry Lube
$7.99
- Long lasting teflon paraffin wax and oil penetrant set up dry - Law prohibits orm-D materials from shipping by air
White Lightning Clean Ride
$7.99 - $11.99
Clean Ride is White Lightning's legendary self-cleaning lube. By creating a dry, waxy film on your chain this lube doesn't attract dirt and grime like traditional oil based lubricants. Should dirt work its way onto your chain or gears Clean Ride's self-cleaning action is activated causing small particles of wax to break free, taking the riff-raff with it. Not only will you spend less time cleaning your chain, you'll enhance the lifespan of your drivetrain, too!
White Lightning Crystal Grease (3.5-Ounces)
$7.99
White Lightning's Crystal Grease is so pure and innovative, it's clear. Premium base oils allow this 100% waterproof grease to provide smooth, long-lasting lubrication and the clear color won't stain or hide damage and contaminants. And, you'll feel good knowing that it's biodegradable, non-toxic, and won't harm carbon, seals and other crucial components.
White Lightning Wet Ride
$7.99 - $11.99
Rain, sleet, hail, snow, no matter what form it comes in, water can reek havoc on your drivetrain. Fortunately, White Lightning's Wet Ride is designed to meet the demands of riders who traverse soggy terrain and ultra-long distances. This heavy bodied lube is made of premium synthetic oils and water-repelling polymers so it's 100% waterproof and unwaveringly durable. Dirt loving riders will appreciate how well it counteracts the effects of mud and every cyclist will appreciate the anti-corrosion additives that even protect during wet, winter commuting.
Pedro's Pig Juice
$8.00
Developed specifically for Pedro's grime-devouring Chain Pig chain cleaner, Pig Juice is an impressively effective and economical degreaser/cleaner that makes bicycle drivetrain cleaning quick, easy, and safe for anyone from novice to professional. Pig Juice features an advanced pre-activated formula that quickly penetrates & loosens, removing oils, soils, and grime with less scrubbing & rinsing, and leaves spotless residue-free parts. Free of harsh chemicals, gentle enough to use on any material, fully biodegradable, fragrance-free, dye-free, solvent-free, plant-derived, and zero-VOC. - Makes drivetrain cleaning quick, easy, and safe. Perfect in the Chain Pig! - Incredibly effective pre-activated formula quickly removes oils, soils, and grime - Safe on any material, biodegradable, solvent-free, plant-derived, and zero-VOC
Park Tool Folding Hex Wrench Set (1.5-6mm)
$8.49
Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.
Park Tool Freewheel Remover
$8.49
12 splines, 22.6mm diameter fits Shimano, Sachs Aris, Sun Race, DNP Epoch, and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.
Park Tool Magnetic Parts Bowl
$8.49
The Magnetic Parts Bowl is the ideal solution for keeping track of small metal parts. It's 6 inches in diameter and featues an extra-strong magnet so bearings, cones and springs stay put and you don't lose them.
Park Tool Metric Flare Wrench
$8.49
Park Tool's 8mm and 10mm Metric Flare Wrench is used to safely open and close the compression nut on hydraulic brake calipers and levers. The MWF-1 features angled heads for easy access, and unique, semi-box openings to reduce the risk of damage to the compression nut and brake line.
Park Tool Shop Cone Wrench (23mm)
$8.49
Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. This 23mm size fits Shimano 15mm through-axle hubs. Some applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.
Park Tool Shop Cone Wrench (24mm)
$8.49
Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. This 24mm wrench fits Shimano 15mm through-axle front hubs and many suspension-fork top caps. Some applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.
Park Tool Shop Cone Wrench (26mm)
$8.49
Park's Shop Cone Wrenches are made of durable tool steel and are thin to fit the low-clearance adjusting nuts and cone flats on hubs and other bearing assemblies. Park's special Y-heads put more material where it's needed for excellent durability and holding power. The 26mm size fits through-axle end caps and suspension fork crowns. Most applications require at least 2 cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.
Park Tool Shop Cone Wrench (28mm)
$8.49
Park Cone Wrenches are made of durable tool steel to fit the low-clearance adjusting nuts and cone flats on hubs and other bearing assemblies. Park's special Y-heads put more material where it's needed for excellent durability and strength. The 28mm size fits newer Shimano 20mm through-axles, as found on XT, XTR and Saint hubs. Most applications require at least 2 cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.
Rock-N-Roll Miracle Red Spray Concentrate
$8.60
Miracle Red is a 3-in-1 bio-degreaser, hand cleaner and stain remover. - 100% natural, no citrus, pumice or petroleum products - This product will float the grease out of finger prints and will remove grease from white T- shirts like a miracle
Park Tool Bladed Spoke Holder
$8.95
Park's Bladed Spoke Holder is a must for building and truing wheels that feature bladed spokes. It has 4 different size slots to fit a wide variety of bladed (aero) spokes from .08 to 2mm wide. It holds them safely in place to prevent twisting as you turn the nipple to true and tension the wheel.
Park Tool Cassette Lockring Tool with 5mm Guide Pin
$8.95
Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool
Park Tool Hex Tool
$8.95 - $12.95
Specially designed for crank bolts, freehub removals and pedal installs and removals, Park's Hex Tools are built for speed, leverage and comfort. Their super-precise hex heads and dual-density, ergonomic handle mean the HTs may soon become your new favorite tools.
Park Tool Hex Wrench (11mm)
$8.95
Park's Hex Wrenches are every mechanic's best friend. They are constructed from industrial quality steel for durability and feature chamfered tips for a precision fit. And, their convenient L shape is perfect for jobs that require lots of leverage or for getting to hard-to-reach bolts.
Park Tool P-Handled Hex Wrench (6mm)
$8.95
Choose the perfect tool for the job with Park's P-Handled Hex Wrenches. These top-shelf Allen wrenches come with offset handles made from durable nylon in a comfortable, ergonomic design. They are made of chrome vanadium for exceptional durability. The long shafts feature Bondhus heads for accessing hard-to-reach bolts and the short ends are chamfered for extra grip and high-torque applications.
Park Tool Synthetic-Blend Chain Lube
$8.95
Keep your chain running smoothly with Park's Synthetic-Blend Chain Lube. It uses PTFE and a proprietary blend of oils to penetrate, reduce friction, prolong chain life, displace moisture and protect chains from rust and corrosion. Plus, it works great on cables, spokes, and derailleur and brake pivots, too.
Topeak Shuttle Lever 1.2
$8.95
Topeak's Shuttle Levers are strong enough for even the busiest shops; think what they'll do for that tight road tire and fat downhill rubber. These levers are extra long for leverage and are made of engineering-grade plastic with stainless-steel reinforcements down the middle that ensures years of hard use.
Finish Line 1-Step Cleaner and Lubricant
$8.99 - $12.99
Need to give your bike some quick attention before you head out the door? Give it a quick shot of Finish Line's 1-Step Cleaner And Lubricant. It loosens and removes grime, while at the same time laying down a thin layer of low-friction lube that reduces drivetrain noise and premature component wear. Keeping your bike running smooth has never been easier!
Finish Line Bicycle Disc Brake Cleaner
$8.99
Designed to leave zero residue after application, Finish Line’s Bicycle Disc Brake Cleaner displaces any moisture built up on the pad or rotor, resulting in improved and predictable braking, and reduced brake squeal. With the unique characteristic of being acetone free, Finish Line’s Bicycle Disc Brake Cleaner is strong enough to clean the dirtiest rotors, yet safe enough to use around paint, carbon fiber and plastic parts. - Engineered to rapidly clean disc brake rotors and pads - Acetone-free formula
Finish Line DOT 5.1 Brake Fluid (4-Ounce Bottle)
$8.99
Finish Line's DOT 5.1 Brake Fluid is a high-quality fluid for maximum life and braking power. It exceeds the most stringent 5.1 specs and is compatible/mixable with all DOT 3, 4 or 5.1 spec'd systems. It also features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.
Finish Line Max Suspension Spray
$8.99
Whether you're fine-tuning your new full-suspension rig or tuning a fork you've ridden for years, Finish Line's Max Suspension Spray is a pro-grade stiction-fighting stanchion lubricant that maximizes the performance of your suspension. It smooths suspensions that have become dry or dirty and restores full travel and eliminates noise, too. Use Max before rides to ensure maximum responsiveness over the smallest of bumps, and the longest possible travel over extreme terrain. And, use Max to break in new forks or bring old ones back to life. It also conditions and protects rubber seals and O-rings and improves the surface slip of coated stanchions. - Helps suspension forks run more smoothly and quietly - Made with polysiloxane and advanced fluoropolymers
Finish Line Mineral Oil Brake Fluid (4-Ounce Bottle)
$8.99
Finish Line's Mineral Oil Brake Fluid is high quality to provide maximum fluid life and braking power. It features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.
Finish Line No Drip Chain Luber
$8.99
Lubing your bicycle's chain is an essential but messy task. But now, thanks to Finish Line's No Drip Chain Luber, you can oil your chain perfectly without making a mess. Just add your preferred chain lubricant (sold separately) and you'll have your chain lubed in just seconds flat. Not only does it keep things tidy, it saves you chain oil, making sure that not a drop is wasted.
Muc-Off Drivetrain Brush
$8.99
- Paintbrush-like shape for easier application and cleaning
Muc-Off Tire and Cassette Brush
$8.99
- Stiff nylon bristles and perfect size for blasting through dirt caught on wheels and cassettes
Park Tool Bottom Bracket/Cassette Tool (Campagnolo)
$8.99
Park's Bottom Bracket/Cassette Tool for Campagnolo is an indispensable tool for your Campagnolo drivetrain. It's for installing and removing all Record, Chorus, Centaur and Athena bottom brackets, and all Campagnolo cassette lockrings.
Park Tool Shop Cone Wrench
$8.99
Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.
RockShox Suspension Cleaner
$8.99
This is RockShox's recommended cleaner for suspension internals. Handy aerosol spray degreases and conditions small parts like O-rings and seals. - Formulated with special conditioners that will not cause O-rings and seals to dry, crack, or degrade - For use on all suspension products
White Lightning Epic Ride Bike Chain Lube
$8.99 - $14.99
White Lightning's Epic Ride lets you take on that all day ride and hear only the birds chirping, not your chain squealing. Its unique formula features premium non-petroleum synthetics that provide unheard of durability without the grimey build-up common with synthetic oils. This versatile lube also works wonders on derailleur cables and suspension seals. And, good news for the forgetful amongst us, Epic Ride is lube-and-go, no prep or dry time required!
White Lightning Matte Finisher
$8.99
Matte Finisher, 19oz Spray Bottle Matte Finisher delivers a streak-free, gloss-free finish, which helps matte finish bikes look "showroom" new. Also safe for use on clear-coated bicycles.
Rock-N-Roll Miracle Red Bio-Cleaner/Degreaser
$9.00
- 3-In-1 Bio-degreaser, hand cleaner, and stain remover - 100% Natural, no citrus, palmas or petroleum
Park Tool Replacement Clamp Covers
$9.14 - $25.08
Everyone wears out their Park Tool work stand clamp covers at some point. Find replacement covers for yours here. Each cover is constructed of soft, durable composite rubber. See below to determine which covers fit your Park Tool stand clamp: - 1002: fits 100-3X and 100-5X extreme range clamps - 1185: fits clamps on the repair stands PCS-9, PCS-10, PCS-11, and PCS-12 - 1259: fits 100-4X, 100-6X, 100-7X, and 100-15X clamps - 1960: fits 100-3D, 100-5D, and 100-25D Professional Micro Adjust Repair Stand Clamps - 468B: fits clamps with double cable reliefs, including 100-3C, 100-5C, 100-8C, 100-8Y, and 100-9C clamps - 467B: fits clamps with single cable relief, including PRS-2 through PRS-8 (for older-style clamps, non-current) - 468G: fits PCS-1 and PCS-2 clamps with double cable reliefs (clamp models: 100-1C, 100-1CA, and 100-2C) - 467G: fits PCS-1 and PCS-2 clamps with single cable relief (for older PCS-series stands only; not for current model stands) - 466: Rubber Replacement Clamp Cover Set (fits older clamps with plastic-dipped jaws)
Wheels Manufacturing Inc. Bearing Extractor Pusher
$9.25
Pusher for Wheels Mfg sealed bearing extractors. - For use with Wheels Mfg. 1/2-inch threaded rod press handles - Part of a system that requires additional pieces to function
Park Tool Triple Spoke Wrench
$9.49
• Updated to fit better in the hand with a more rounded, smoother shape • The precision sized SW-7.2 fits the three most popular spoke nipple sizes on the market • Nickel plated for years of service • Designed for the home mechanic. FIts the following size spoke nipples: • .127" (3.23mm) • .130" (3.30mm) • .136" (3.45mm)
Pedro's Degreaser 13
$9.50 - $14.00
Degreaser 13 takes degreasing chemistry to new levels with performance that must be seen to be believed. Your drivetrain hasn't been this clean since the day you bought it! Developed from scratch, specifically for the challenges of bicycle drivetrain degreasing, the advanced formula is engineered to fight its way to metal surfaces and stay there, then attack and break free the bonds holding oils, soils, and grime in place, and finally dissolve and contain to carry it all away. Fully water soluble and further activated by light scrubbing and rinsing, the result is a spotless residue-free drivetrain with every surface cleaned completely. Pedro's advanced formula is also safe to use on any material, fully biodegradable, solvent-free, plant-derived, and zero-VOC.
White Lightning Clean Streak
$9.79 - $12.99
- Evaporates fast and leaves no residue - A "no-scrub" cleaner that cleans to the base and prepares surfaces for application of high-performance lubricants - No water rinsing is required - Clean Streak's No-Rinse, No-Residue formula is perfect for use on disc brake rotors