Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Fenders

$4.99
The Hardcore Fender Hardware Kits are compatible with select Hardcore fenders, Full Fenders, Hardcore Recumbent Fenders, and SpeedEZ fenders. Includes: - Rear fender plastic clip - Fork and brake bridge-thru bolts - Stay bolts and lock washers Specific compatibility w/Planet Bike fenders: - 35mm Width: 700c x 35mm Fenders (Hardcore) - 45mm Width: 700c x 45mm (Hardcore, Full, and SpeedEZ); 700c Rear (Hardcore Recumbent) - 60mm Width: 26-inch x 60mm (Full, SpeedEZ, and Hardcore)
$7.99
- Rubber straps - Fit Raceblade, Mud-x - Set of 8
$10.99
Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.
$11.99
The S-Guard is not just for road bike cyclists; this super-lightweight (24g) and small mudguard protects your bottom from mud and water. Made with super-soft material, it fits on nearly every saddle with the addition of a cable tie.
$12.00
The Ass Savers foldable fender hides under your saddle till you need it, then when it rains, you just unfurl it and go. Or if you don't want to have it tucked under your seat, just let it ride in your backpack. It's flat, doesn't take up much space, and can really come in handy. - Dimensions: 340 X 100mm - Material: 100% recyclable polypropylene - Weight: 15g
$12.99
Minimalist down tube mudguard Say it, don’t spray it with our minimalist down tube mud guard. The Grunge Board is a great choice if you are looking for some extra protection from spray, mud, and crud. The downtube-mounted fender has a 3-inch profile and quickly secures to your bike with the two-point rubber strapping system.
$12.99
The Mudrocker Rear Extender can be snapped on and used for extra protection in the bottom bracket/derailleur area. This item is included with the Mudrocker Rear Fender, but we offer it here as a replacement. - Made in Germany
$13.00
Easy to install and available in various colors and designs, the Splash Pad Front Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and compatible with suspension forks. - A low-profile, easy-install fender that keeps riders clean in various conditions - Fits wide range of wheel sizes - Tool-free installation - Zip ties not included. Color zip tie options available through Problem Solvers.
$13.00
Easy to install and available in various colors and designs, the MSW Splash Pad Rear Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and is compatible with standard saddle rail configurations. - A low-profile, easy-install fender that keeps riders clean in various conditions - Fits wide range of wheel sizes - Tool-free installation - Zip ties not included. Color zip tie options available through Problem Solvers.
$14.59
Meet the brand new, fantastic, feature packed Face Fender! Lightweight, discreet, and very effective, the Face Fender is a simple front mud guard for mountain bikes, made from 100% recycled plastic. SHIZZLE SHIELD - Integrated into the Face Fender is the Shizzle Shield, which, when folded toward the tyre, stops pretty much anything from being flung forward and hitting you in the mush. NO MORE ZIP-TIES - No more zip-ties! The fender is profiled to hold the Velcro fastener without needing zip-ties or anything else.
$14.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31.7cm / 12.5" (in length) - Weight: 42g / 1.48oz
$15.00
These clip-on fenders are designed specifically for fat bikes. They're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. - Extra-long and wide to accommodate the biggest tires - Easy to install and fits virtually any bicycle - Works with both rigid and suspension forks
$15.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 35cm / 13.8" (in length) - Weight: 68g / 2.40oz
$15.99
- Raceblade Long Hardware Kit, for 2nd bike, or to replace worn parts
$15.99
The X-Board is an innovative clip-on fender with rubber fasteners for downtube mounting. - Adjustable soft rubber cable-spacers, ideal to adapt on almost any tube profile - Robust rubber fasteners - Dual compound-softspoiler
$15.99
An easy-to-install fender for blocking tire spray and protecting fork stanchions in sloppy conditions. SO FAST AND SO CLEAN The Bontrager Enduro Front Fender keeps menacing tire spray away while also protecting your fork stanchions from trail splatter. This durable, flexible poly fender has you and your bike covered when the trail gets sloppy. Installation is quick and easy, and the reversible design offers graphic options for bonus styles, free of charge. PRODUCT DETAILS - Quick and easy attachment installs to most forks in seconds - Easy installation with four attachment locations (attachment zip ties not included) - Multiple mounting eyelets for easy adjustment and compatibility for most forks and tire widths - Flexible 1mm poly material is durable and can be easily cleaned - Reversible design offers two graphic options - Recyclable polypropylene material
$15.99
Genuine replacement parts The right parts for the right bike. Product details - Includes mounting hardware - Plastic construction - Intended for 20" and 24" Trek Wahoo Trail models - Installation should be performed by authorized service centers only
$16.00
Just the thing for rainy weather, the Portland Design Works minimalist Origami Front Fender attaches to a snap-on/off bracket you mount on your downtube. And it folds flat so you can easily stow it when not in use. - Length: 370mm (14.5") - Weight: 60g (2.1oz)
$16.50
'Soggy Arse Syndrome' protection for your treasured derriere. Lightweight, discreet, and very effective, the Butt Fender, Black looks great while helping to keep your backside clean and comfortable. CURVALICIOUS Having extra curves, in the right areas, the new Butt Fender offers more protection for your peachy derriere while eliminating any possibility of it getting caught on your tyre, at full drop - the fender, not your butt. FASTENERS? PFFT! The profile of the Butt Fender is enough for you to attach it to your saddle without the need for additional fasteners. EVERY LITTLE HELPS And for those with clumsy fingers and thumbs, like us, there's now an additional tab to grab hold of when pulling the fender down onto the bottom rails. ECO-SAVVY We are always looking for ways to eliminate single-use plastic and waste from our products and packaging. And the Butt Fender is no exception. There isn't a piece of single-use plastic in sight. No fasteners. No packaging. Nowt! Furthermore, each Butt Fender is proudly made just up t'road, using 100% recycled plastic. And when it can protect your butt no more, you'll be glad to know that it's also 100% recyclable. - Weight: 30g - Length: 350mm - Width: 130mm - Height: 1mm
$16.99
Original equipment replacement fender. GENUINE REPLACEMENT PARTS Get back on the road with an original replacement fender for your Ponto Go!. PRODUCT DETAILS - Mounting hardware not included - Sold individually - Plastic construction
$17.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31cm / 12.2" (in length) - Weight: 47g / 1.66oz (FS, on fork)
$17.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 57.5cm / 22.6" (in length) - Weight: 75g / 2.65
$18.00
Portland Design Works has given the original fat bike front fender a facelift! The Mud Shovel 6.5 Front Fender was designed specifically for fat bikes - they're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. Made of heavy-duty polymer, the Mud Shovel 6.5 Front Fender is super lightweight but sturdy enough to take years of bad weather abuse. The fender mounts to the downtube of your bike using adjustable rubber straps for a secure fit. - Front fender is 254mm wide and 622mm long (10" x 24.5") - Extra-long, wide design blocks snow, water and sand - Bracket keeps fender super stable and is easy to install - Built with lightweight, sturdy materials for durability
$20.00 - $25.00
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess. - Works on all RockShox fork models - Comes with 4 zip ties for immediate installation - Offered in a wide range of colors that match RockShox's fork decal packs - Designed specifically for RockShox forks - Deep side skirts protect stanchions and dust seals from rocks and debris - Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed
$21.00
Just the thing for rainy weather, the Portland Design Works minimalist Origami Rear Seatpost Fender attaches to a clamp-on bracket you mount to your seatpost. And it packs down so you can easily store it when not in use. - Length: 445mm (7.5") - Weight: 160g (5.6oz)
$21.00
Portland Design Works' neat Sodapop Fenders are made from 97% post-consumer recycled bottles. They pop on and off with ease, keep you dry in the rain, and get one back for the planet, too! - City width: 48 mm at tail - Mountain width: 64 mm at tail
$22.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.
$24.99
Quick fastening fender sets The Clip Ons do just that. They clip on and off in seconds. They are a great choice if your bike doesn’t have fender eyelets or if you want an easily removable fender. They protect you and your bike from road grit, water, and other tire spray. - Durable all-weather polycarbonate blades - Includes hardware to create a secure fit on most bikes - Eyelets Required?: No - Wheel size: 26" - Fender width: 70mm - Max tire size: 26" x 2.0" - Weight: 236 grams
$24.99
Quick fastening fender sets The Clip Ons do just that. They clip on and off in seconds. They are a great choice if your bike doesn’t have fender eyelets or if you want an easily removable fender. They protect you and your bike from road grit, water and other tire spray. - Durable all-weather polycarbonate blades - Includes hardware to create a secure fit on most bikes - Eyelets Required?: No - Wheel size: 700c - Fender width: 50mm - Max tire size: 700c x 40mm or 27" x 1.5" - Weight: 243 grams
$24.99
Turn your bike into an all-weather vehicle with SKS's Beavertail Fender Set! The robust steel brackets provide safe and easy mounting, and the front fender works with most suspension forks.
Page 1 of 5 Next page