Parts & Accessories
Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount rear light to the back of your Bontrager Circuit MIPS road bike helmet - Tested with an accelerometer for intended breakaway point if involved in a crash
PWR Helmet/GoPro Mount - for holding charger and modular lights on top of helmet (Excludes PWR Mountain). Tri-prong system works with GoPro, so can be used to mount lights under Garmin and other mounts. - Compatibility: Works with PWR Charge and Modular lights (not PWR Mountain) - Mounting system: Designed to fit most vented helmets, common for road and trail cycling and is GoPro compatible - T Slot (For modular): Allows for quick release of the light when parking your bike - Weight: 20g
Product details - Compatible with USB rechargeable Flare taillights and all Ion headlights - Fits handlebars/seatposts 22.2-35mm and Ride Tuned Seatmast Caps - Silicone body with a tooled adjustment clamp diameter - When rotated for a Flare, the bracket is angled to compensate for an angled seat tube - 25g
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr High Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light above your stem to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Strap Light & Motion's Vis 360 Spare Front Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series
An attachment to use when mounting your PWR Rider or PWR Commuter bike lights to your helmet. PWR Red Cap gives you a 12 lumen narrow rear light beam for day & night visibility. Use the Modemaker app to program your rear light. - Includes: - PWR Red Cap Rear Light - Helmet Mount (also works with GoPro mount) - Adaptor - Hex Keys
Quick, easy straps for your Flare and Ion lights Product details (Front - Ion) - Fits all Ion headlights - Works best with 22.2 - 35.0mm handlebars Product details (Rear - Flare) - Fits all Flare tail lights - Works best with 27.2 - 31.6mm seatposts - Includes 16 degree offset for optimized use on seatposts
Light & Motion's 11.1v 6-cell Li-ion Battery packs enough juice to illuminate all your epic adventures. Its hook-and-loop strap and small size make it easy to mount to the stem or frame. Plus, it conveniently fits in pockets and packs, too.
- Fits 25.4-31.8mm handlebars - Compatible with Blaze, Beamers, 1200, 5000x and Super Spot
Taillight Seat Stay Mount
Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series
Lezyne's Aluminum Helmet Mount is a durable accessory for Lezyne Mini XL, Power XL, Super XL, Deca, and Mega Drive lights. It has a stamped and machined aluminum base plate, a compression ring, a Composite Matrix spherical pivot, cradle and a Velcro strap which attaches the mount to the helmet. The spherical pivot allows the user to adjust the position of the light in all directions.
- Mounts most AA flashlights to handlebars and helmets - Ideal low-cost lighting alternative for cyclists
Replacement seat post mount for the Tuck e-Bike Taillight. Secure design with non-slip strap ensures light is stationary even in rough, bumpy terrain. - Includes plastic wedge spacers to ensure Tuck mounts at optimum angle for premium visibility
Light & Motion's 11.1v 3-cell Li-ion Battery is nice and small and it's lithium-ion technology means impressive run times, while its gossamer weight of only 180 grams means it's easy to carry in a pocket or packs. It also comes with a convenient mounting strap.
- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem - Made in the USA - Material: 6061 Aluminum - Weight: 24g - Outside Diameter: 26.0mm - Stem Size: Threadless 1-1/8"
Strap Light & Motion's Vis 360 Spare Rear Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.
Take your Light & Motion headlight off your handlebars and along with you wherever the path may lead. Soft fabric and full adjustable sizing make for a comfortable fit.
Light & Motion's 7.4v 2-cell Li-ion Battery is compact and lightweight to power your light without weighing you down. It slips into a jersey pocket or pack or attaches to your bike via the convenient integrated rubber strap.
Put a Flare almost anywhere - For use with all Flare tail lights - Perfect for attaching to a seat pack, belt, backpack, or anything with a loop - 2g
Key features: - Securely attaches all Ion lights to bars - Reduces vibration and slippage - Compatible with 22.2-31.8mm diameter bars - Mount rotates left and right for optimal placement
Welcome to the future The Transmitr Remote wirelessly controls up to seven Transmitr ready devices. It easily attaches to any bike's handlebars for convenient on the bar control of all Transmitr lights. The ANT+ enabled Transmitr remote is compatible with all Transmitr products and allows for wireless on/off, mode selection, real time light battery status, and more. - Transmitr remote can simultaneously control up to 7 lights - ANT+ enabled for use with all Transmitr products - Use Transmitr system for wireless on/off, mode selection, and more - Can be used with multiple Flare RT lights for turn signal configuration - Includes CR2032 battery, mount, and quick-start manual
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter
Product details - Perfect for mounting compatible Flare taillights to rear rack - Includes a bolt and star washer for extra security - Easiest to install with light installed for better leverage
Product details: - Replacement or extra mounts for all Bontrager Flare rear lights - Use to mount Flare lights to seatposts, racks, seatstays, or any other creative spot - Kit includes Flare light mount, two bases, and rubber strap adapters
Product details - Easily integrate your Bontrager Flare tail light on your Madone 9 Series - Quick release designs matches perfectly on the Madone 9 proprietary seatpost clamp
In-vehicle charging adapter for charging USB rechargeable batteries. System Compatibility: - Lumina Series - MiNewt Cordless Series - MiNewt Mini Series - Lightning Bug 120 USB - Sentinel 2W USB - Solas 2W USB - Stinger USB
Vya redefines bike safety with smart, advanced features and an ultra-compact design. Extra seat post mounts allow Vya to be switched between bikes in seconds – perfect for families and multiple bike owners. This versatile mount can be used with the horizontal position of the Vya Pro Taillight or the vertically mounted Vya. Features - Innovative twist-lock system ensures Vya will lock into mount and not vibrate free - Vya Pro Taillight mounts in a horizontal orientation; flip mount down for the standard vertical style of the Vya taillight - Compatible with Vya Pro Taillight and standard Vya Taillight
The versatile Composite Matrix Helmet Mount is a durable and versatile accessory for Lezyne KTV Pro, Power XL, Macro XL, Hecto XL and Micro XL Drives. It is constructed with lightweight and durable mold-injected Composite Matrix material for its base plate and spherical pivot. A strong rubber and Velcro strap attaches the mount to the helmet. The Composite Matrix spherical pivot and cradle allow the user to adjust the position of the light in all directions.