Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.
Bontrager's BackRack Deluxe S is made for mountain and hybrid bikes with frame sizes 18 inches and under, and road bike frames 54cm and under. This durable and light rack is perfect for turning your bike into a commuter and errand-runner. Single-bolt strut mounts allow for maximum adjustablility and ease of installation. Plus, the BackRack Deluxe boasts side rails, making it compatible with standard trunk bags and panniers as well as Bontrager's Interchange models (sold separately).
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes, and has a center strip that acts like a short fender, too.
Bontrager's BackRack L is made for mountain and hybrid bikes with frame sizes 18 inches and over, and road bike frames 54cm and over. This durable and light rack is perfect for turning your bike into a commuter and errand-runner. Tough and rustproof stainless-steel hardware is included and the single-bolt strut mounts allow for maximum adjustablility and ease of installation. And, the BackRack is compatible with standard trunk bags and panniers as well as Bontrager's Interchange models (sold separately).
Bontrager's BackRack S is made for mountain and hybrid bikes with frame sizes 18 inches and under, and road bike frames 54cm and under. This durable and light rack is perfect for turning your bike into a commuter and errand-runner. Tough and rustproof stainless-steel hardware is included and the single-bolt strut mounts allow for maximum adjustablility and ease of installation. And, the BackRack is compatible with standard trunk bags and panniers as well as Bontrager's Interchange models (sold separately).
Make your fat bike a load-hauling master with Axiom's Fatliner. It's disc compatible, and it's made from rugged 6061 T6 aluminum to keep strength to the max and weight to a minimum. There are plenty of mounting options to accommodate all sorts of fat bikes, and it fits dropouts from 170 to 190mm apart. Get fat, get loaded, and go adventure with the Fatliner.
Most of you don’t need the cargo capacity to land a helicopter on your rack. Sometimes, all you want to do is grab a sixer from the beer store on the way home, or pick up a nice bouquet of flowers. For whatever the situation dictates, Surly offers the 8-Pack Rack. Made from the same tubular cromoly steel as their front and rear touring racks, the 8-Pack Rack is a solid pedestal upon which you may rest a handlebar bag, grocery bag, minaudiere, satchel…or whatever you use to carry your bowling ball around. The 8-Pack Rack attaches to most forks with mid-blade and crown eyelets. It uses stainless steel hardware and has the characteristic durability, versatility, and repairability all Surly products are known for. The 8-Pack Rack has lots of barrel braze-ons, so you can customize your cargo tie-downs…or just bolt on as many lights as you can possibly find. It’s rated to carry up to 30lbs (13.6 kg) and comes in black or silver.
Axiom's Journey Rack is made of light, rugged aluminum. It is specially designed to handle even the largest and heaviest panniers (sold separately) with additional looped struts that prevent the bags from swinging into the wheel. It also has a platform on top, which adds strength and doubles as a mini fender.
Patented rack attachment system works on virtually any bicycle from full-suspension mountain bikes to commuters and everything in between. - Patented attachment system secures easily - Tough construction allows for variety of rugged riding uses - Silent and vibration free performance - Includes rails for mounting panniers - Works on the rear seat stays and front fork - Works with any type of frame material
Set out on an adventure with Salsa's Alternator Rack. Built for 170mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.
Boost the carrying capacity of your Topeak MTX BeamRack (sold separately) with their Dual-Side Frame. It enables you to attach panniers and other Topeak MTX bags to your BeamRack.
Blackburn's EX-1 rack does everything. Built for maximum durability of 9mm aircraft-grade 6061-T6 aluminum, this rack features a 3-strut design to control the load and is compatible with Copilot child seats (sold separately). It fits most bikes.
Planet Bike's Versa Rack means your steed with disc brakes can finally be made into a rack-packing workhorse. It's 6061-aluminum construction provides maximum strength and stability. Thanks to the clever design you'll have complete heel clearance when you install packs. Plus, the pre-installed rack hardware makes it a cinch to mount the Versa Rack to your bike.
Axiom's Flip-Flop LX Seatpost Rack is perfect for hard-to-fit bikes like full-suspension models, ones with disc brakes and those without frame eyelets. This easy on/off quick-release rack is made of light and strong hand- and double-welded tubular 6061 T6 aluminum and it boasts a flip-flop support arm for mounting the rack in a high or low position, which lets it fit on most bicycles. There's ample carrying capacity with a spacious top platform that's perfect for trunk bags (sold separately). You can even slide off the platform with a trunk bag for convenience, and slide the platform in when not in use so it takes up less space. One rack to fit any bike: A seatpost rack whose support mast can be flipped to a high or low position to accommodate different frame designs. - Hand-welded, tubular 10.2mm 6061 T6 aluminum. - 6061 T6 aluminum support beam. - Quick-release bracket fits 25.4 – 33 mm alloy or steel seatposts. *Not recommended for carbon seatposts - Patented FLIP-FLOP® system allows you to optimize the shape and position of your rack on almost any bike. - Quick-release levers allow pannier-compatible platform to be removed - Double welded for extra strength and long-term durability. - Reflector/light mount
- Fits on touring, hybrid and mountain bikes - Super tough 10.4 mm diameter 6061 T6 tubular aluminum tubing - 2.0mm wall thickness - Hardware included - Maximum capacity: 15kg - Weight: 580g / pair
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap onto your big-wheeled bike. It's made of tubular aluminum, fits most bikes with disc brakes, hauls up to 55 pounds and has a center strip that acts like a short fender. It's compatible with Topeak's QuickTrack bags and accessories (sold separately), too.
Replaces stock Streamliner foot to adapt any Streamliner rack (sold separately) to fit onto standard 10mm nutted wheel axles. Ideal for fixies, cruisers, urban bikes and traditional bikes without eyelets. CONSTRUCTION • Aluminum ADDED BENEFIT • Makes the Streamliner rack (sold separately) even more versatile
- Features T-Twist (patented) adjustable arms - Compatible with most disc brakes - T-Track mono stay included - Oversized 10mm AL-6061 tubular alloy - Detachable stainless steel dropouts - 6cm of set back for improved heel clearance - M5 threaded holes on dropouts to mount fender stays - Top surface width: 90 to 128mm - For 26-inch / 700C wheels (max tire 29 x 2.1-inches)
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes with disc brakes, and has a center strip that acts like a short fender, too.
Wald bicycle racks offer a simple rear rack design for easy use. Lightweight, yet sturdy construction with simple mounting points located at eyelets near the rear axle and the brake mount. The 215 works perfectly with Wald's innovative 582 rear folding basket. - Simple design for easy use - Lightweight, yet sturdy - Steel rack w/adjustable brake bolt mount - Loading surface = 13" x 5" - Lightweight at just over 2 pounds
When it's time to ditch the backpack, the back soreness and the back sweat, look no further than the MSW Pork Chop Light Duty rack. It's got plenty of capacity for those key items on your journey. - W-bend stays keep pannier hooks in place - Fits most bikes with 26" - 700c wheels - Designed for bikes without disc brakes (for disc brake bikes, see RCR-100D) - Holds up to 40 lbs. of cargo - Top platform dimensions are 310mm x 112mm
With an already simple, bombproof design, the Blackburn Grid 2 rear rack improves on the Grid 1 rack by adding an aluminum top deck that acts as a fender and can allow you to mount a trunk style bag. A perfect choice for a hard-core commuter. - Performs great with trunk bags - Light and reflector mounting loop - 45lb/20.5 kg capacity
Jandd Expedition Rear Mount Rack is the rack of choice for cyclists who require exceptional durability and expanded size, measuring a full three inches longer than the Jandd Standard Rack. - Fits up to 700c wheels - AL-6061 construction - Has angled third strut and double welds at stress points - Weight: 1000 grams - Platform dimesions: 6 x 16.75 inches - Rack weight limit: 75 pounds
The Blackburn Grid 3 adds on a solid rack foundation with a spring clip to allow you to quickly store a jacket or extra layer on top of the rack. A slickly designed, yet simple to install rear rack perfect for anything from a multi-day tour to running errands around town. - Performs great with trunk bags - Light and reflector mounting loop - 45lb/20.5 kg capacity
- Sturdy braced tubular alloy construction - Heavy-duty side rack design for pannier use - Fits 26, 27.5, and 29-inch and 700c wheel bikes - Integrated fender top design - 40kg / 50lb weight limit
- Blackburn Fit System – mounts perfectly with 26”, 700c or 29” wheels, disc compatible and will work with most brake or frame mounts - Removable top rack - Works well with most suspension forks - Low and high pannier mounts - Aircraft-grade 6061 aluminum tubing - 45lb/20.5kg carrying capacity
This one-size-fits-all aluminum tubular rear rack is designed exclusively for Fat Bikes with disc brakes. The rack legs are adjustable to fit most 24” & 26” wheel Fat Bikes. The integrated side bar provides a lower pannier attachment point allowing more space for cargo on top of the rack. The MTX QuickTrack plate is compatible with any Topeak MTX TrunkBag, MTX rear basket, and most other rack packs and panniers on the market. Not compatible with asymmetric rearstay design fat bike frames.
Surly Racks are well-thought-out, durable, expedition-worthy racks that work with most panniers. While their racks aren't limited solely to heavy duty touring, that is what they were designed for. When you're out on the road, the best option is to never ever have anything ever go wrong ever. Right? That's never a guarantee though; so having something that you can repair if it does break can be pretty clutch. Thus, the main bodies of Surly's front and rear racks are made from tubular CroMoly steel with stainless hardware. This means you can probably find someone out there that can torch it back into one piece in the rare instance things go south. The Front Rack is height adjustable and provides either a low or high pannier mounting position, which can be handy depending on terrain. When the ground gets rough, keep your gear high and dry. When the path is smooth and easy, you can load things low and keep everything balanced and stable, with the platform above the wheel providing yet more space for more stuff. It's worth mentioning they've redesigned the Front Rack hardware to be simpler to attach and more compatible with things like disc calipers and fenders. Surly also made attachment plates specifically for their Uni-Crown forks for yet more fork compatibility. This simpler design has fewer moving parts and costs less to manufacture; ergo, costs less for you to purchase. Surly's front rack WILL work with disc brakes on the Troll, Ogre, and Disc Trucker frames. It may take a bit of work to get clearance around the front caliper since the many different calipers out there are many different shapes. The new attachment plates will limit any DIY ingenuity you might need, but if you need to throw a washer or three behind the lower left bolt where the plate attaches to the fork dropout, that's not a big deal. As part of Surly's ongoing effort to make this planet last a little longer, they recently started shipping their racks with a small, reusable Surly Tool Bag that houses the rack struts and hardware. This switch helps eliminate the use of some polybags, thereby minimizing excess waste. Plus, you get a free tool bag out of the deal. Surly Front Rack will haul up to 32kg (70 lb) of well-secured, well-balanced gear over roadways and maintained off-road trails. Front Rack specifications: - Tubing diameter: 10mm - Platform dimensions: 230 x 170mm - Weight: 1382g
Blackburn's TR-1 is ideal for commuters and students seeking a convenient and dependable way to haul their necessities. It boasts light, durable TIG-welded 6061-T6-aluminum, stainless-steel hardware and a platform that doubles as a fender to protect you and your cargo.
Topeak's Disc-Mount Rack allows you to easily mount your BabySeat II or your Topeak MTX TrunkBags (both sold separately) to your bicycle. And, this tubular aluminum rack features tabs that clear most disc brake mounts so you can use your disc brake-equipped bike to run errands with your favorite little passenger or extra storage room.
Page 1 of 3 Next page